1、 Instant maintenance after use
a. Cleaning: Use a dry/slightly damp soft cloth to wipe sweat off handrails, seat cushions, rollers, and anti slip pads. Do not rinse with large amounts of water; Do not use highly corrosive cleaning agents on plastic and foam components to avoid aging and peeling.
b. Return to position: Reset and adjust the gear, fold the buckle properly, clean the debris around the instrument to prevent collision.
2、 Regular inspection (weekly)
a. Fasteners: Check screws and bolts for looseness and tighten them in a timely manner; Stop immediately if any slippage or deformation is found.
b. Load bearing structure: Pay attention to the brackets and welding points, and check for cracks and bends (especially when using heavy equipment).
c. Moving parts: roller, shaft, spring. If there is any jamming or abnormal noise, a small amount of silicon-based grease can be applied; Do not use engine oil, it is easy to get dusty.
d. Soft cushion/anti slip component: Check for cracked foam and worn anti slip pads, replace them promptly if damaged, to prevent slipping and injury.
3、 Storage environment
-Place in a dry and ventilated place, away from moisture and direct sunlight, to prevent metal rusting and foam aging and becoming brittle.
-The ground should be kept flat, preferably with anti slip mats to avoid displacement during use and reduce wear on the bottom of the bracket.
4、 Safety taboos
a. Structural cracking, welding detachment, and load-bearing deformation were found, and continued use is prohibited.
b. Wipe off excess grease after lubrication to avoid slipping.
c. Do not overload and strictly follow the maximum load-bearing capacity indicated on the equipment.
5、 Monthly deep maintenance
Fully tighten all connecting components; Thoroughly clean the gaps and dust; Recheck the welding area, ropes/elastic bands (if any), and replace the elastic bands directly if they have cracks, whitening, or aging.